| WOLF CUT ROOM ACCESSORIES | |
 |
 |
| WOLF FABRIC ROLL SUPPORTS
Portable Fabric Roll Supports let you set up for spreading nearly anywhere on any kind of table. Surprisingly easy handling, thanks to heavy-duty roller bearings and polished steel bar cradles. Each pair of supports accommodates rolls up to 300 lbs. Heavy-duty cloth roll bars, cones, weights and optional roller cross beams are also available from Wolf. |
|
 |
WOLF CUTTING TABLES
Wolf can supply you with any standard table, plus special custom tables such as heavy-duty, transfer, air/vac and others. Call your local Wolf representative for details. |
| HOT KNIFE II
Cut and seal synthetics and other fusibles in one operation. Complete with automatic timer and safety stand. Heat range 650 degrees to 750 degrees Farhenheit; 3" Blade diameter. 110 to 220 volts, single phase, 50 or 60 cycles. |
 |
| "ZA" RAG CUTTER
Fastest, most economical cutter of its type. Split shoulder pads, remove buttons and cut wiping cloths. quick depth adjustment for different operations. Table, stand or portable units available in single or twin arm models. |
 |
WOLF CLOTH DRILLS
Your choice of exclusive "KX" lever action or finger triggered "X" straight action makes Wolf the best drill you can buy. Optional heat element secures synthetic lays and gives loose fabrics a mark that will not close up. Available in 6", 8" and 10" needle models with needle diameters from 1/16" to 1/2", 8" to 12" base plate and multiple hold guide bushing available on cold drills. |
 |
'WP' PATTERN PERFORATOR
Fingertip control triggers punch through one or multiple thicknesses. Roll to any one point on the pattern without lifting. Punch sizes 3/64" to 3/32". Weight 5 lbs. |
 |
SPEEDI-NOTCH
Gives you a rapid, positive, non-raveling seared "V" notch through natural fiber lays up to 10". Variable temperature control lets operator pick correct heat setting. 115 or 230 volts. |
 |
WOLF-BOSCH FOAM RUBBER CUTTER
Two blades work simultaneously in opposite directions for stable, precision cutting of foam and other rubberized materials. Cutting depths of 3", 5", 8" to 12". 110 or 220 volt electric, or extra powerful air drive. Weight: 3 1/2 lbs. |